loading
Home  >  PRODUCT  >  Flow Instrument  >  Electromagnetic Flowmeter  > 

Kaidi KD QTLD Split Electromagnetic Flow Meter IP65, IP68 optional for petrochemical

这里可以自定义设置
product-Kaidi Sensors-Kaidi KD QTLD Split Electromagnetic Flow Meter IP65, IP68 optional for petroch
product-Kaidi KD QTLD Split Electromagnetic Flow Meter IP65, IP68 optional for petrochemical-Kaidi S-1
product-Kaidi Sensors-img-1
product-Kaidi Sensors-img-1
product-Kaidi Sensors-img-1
product-Kaidi Sensors-img-1
Kaidi KD QTLD Split Electromagnetic Flow Meter IP65, IP68 optional for petrochemical
B站不支持收货地址
B站不支持库存规格
Application:
petrochemical, iron and steel metallurgy, water supply and drainage
Measuring Range:
1500:1 flow rate setting <15m/s
Protection Grade:
IP65, IP68 optional
Accuracy:
±0.5% of indicated value, optional ±0.3% or ±0.2% of indicated value
Process Pressure:
0.6~4.0Mpa (special pressure can be customized)
Process Temperature:
-25℃~+60℃
Explosion proof certification:
ExmdIIT 4
MOQ
1 SET
Payments:
TT, Paypal, Credit card, Western union
Shipping ways:
Express(DHL,Fedex,TNT,EMS,UPS)/Air/Sea
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障
PRODUCT INTRODUCTION

The ratio of the maximum flow rate to the minimum flow rate is generally above 20:1, and the applicable industrial pipe diameter range is wide, up to 3m. The output signal and the measured flow rate are linear, and the accuracy is high. It can measure the flow of acid, alkali salt solution, water, sewage, corrosive liquid and mud, mineral pulp, paper pulp and other fluids with conductivity ≥5μs/cm. Used in petrochemical, iron and steel metallurgy, water supply and drainage, water conservancy irrigation, water treatment, sewage treatment station (environmental sewage control, chemical sewage, electroplating sewage), paper-making (pulp), mud, medicine, food and other industrial and agricultural production companies process flow Measurement and control.

The QTLD series electromagnetic flow meter is a flow meter that performs flow testing according to Faraday's law of electromagnetic induction. The advantage of the electromagnetic flow meter is that the pressure loss is extremely small and the measurable flow range is large.


product-Kaidi KD QTLD Split Electromagnetic Flow Meter IP65, IP68 optional for petrochemical-Kaidi S-2


According to the principle of Faraday electromagnetic induction, a pair of detection electrodes are installed on the tube wall perpendicular to the axis of the measuring tube and the magnetic line of force. When the conductive liquid moves along the axis of the measuring tube, the conductive liquid cuts the magnetic line of force to generate an induced electric potential. This induced electric potential consists of two The detection electrode detects that the value is proportional to the flow rate, and its value is:

  E=KBVD

  In the formula:

  E-induced electric potential;

  K-coefficient related to magnetic field distribution and axial length;

  BMagnetic induction intensity;

  VThe average flow velocity of conductive liquid;

  Delectrode distance; (measuring tube inner diameter)

The sensor uses the induced potential E as a flow signal and transmits it to the converter. After a series of digital processing by amplifying, transforming and filtering, the instantaneous flow and cumulative flow are displayed by a dot matrix liquid crystal with backlight. The converter has 4-20mA output, alarm output and frequency output, and is equipped with communication interfaces such as RS-485, and supports HART and MODBUS protocols.

product-Kaidi Sensors-img-2


Nominal diameterDN10--DN3000mm
Accuracy±0.5% of indicated value, optional ±0.3% or ±0.2% of indicated value
Lining materialPTFE, PFA, F46, neoprene, polyurethane rubber, high temperature rubber
Electrode materialSUS316, Hastelloy B/C, titanium, tantalum, platinum-iridium alloy, stainless steel coated with tungsten carbide
Electrode formStandard type, scraper type, replaceable type
Connection methodFlange connection, plug-in connection, clamp connection, clamp connection, union connection
Medium temperatureAll-in-one-20~+60
SplitNeoprene lining, polyurethane lining-10~+80
PTFE lining, PFA lining, F46 lining-10~+160
Nominal pressure0.6~4.0Mpa (special pressure can be customized)
Ambient temperature-25~+60
Environment humidity5~100%RH (relative humidity)
Dielectric conductivity≥20μs/cm
Measuring range1500:1 flow rate setting <15m/s
Structure typeIntegrated type, split type, immersion type, explosion-proof type
Protection gradeIP65, IP68 optional
Explosion-proof markExmdIIT 4
Product StandardsJB/T9248-1999 electromagnetic flow meter



product-Kaidi Sensors-img-2


Electromagnetic flow meters are widely used in petrochemical, iron and steel metallurgy, water supply and drainage, water conservancy irrigation, water treatment, sewage treatment stations (environmental sewage control, chemical sewage, electroplating sewage), paper-making (pulp), mud, medicine, food and other industrial and agricultural industries Production company process flow measurement and control.


该产品后台详情无内容
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Leave Your Message inputting...